TDS Download Center

Download Technical Data Sheets (TDS) for Jinsu's full range of engineering plastics products — physical, mechanical, thermal properties and processing parameters.

Jinsu has not completed UL Yellow Card certification. TDS data and UL94 test results do not constitute UL recognition. If your project requires a Yellow Card, verify certification for the exact grade before approval or purchase.

38 products

ABS Resin

4 products

Heat-Resistant ABS

Density:1.05 - 1.07 g/cm³
Tensile Strength:45 - 55 MPa
HDT:95 - 105 (1.82MPa) °C

Flame Retardant ABS

-

PA / Nylon

16 products

PA6+40% Carbon Fiber Nylon

Density:1.32 g/cm³
Tensile Strength:240 MPa
HDT:200 (1.82 MPa) °C
Flame Rating:HB (UL 94, 1.6/2.0/3.2 mm)

PA66 General Purpose

Density:1.13 - 1.15 g/cm³
Tensile Strength:80 - 90 MPa
HDT:75 - 85 (1.82MPa) °C

PA66+30% Glass Fiber Nylon

Density:1.37 - 1.39 g/cm³
Tensile Strength:190 - 210 MPa
HDT:250 - 260 (1.82MPa) °C

PA66 FR Reinforced

Density:1.40 - 1.52 g/cm³
Tensile Strength:140 - 170 MPa
HDT:240 - 250 (1.82MPa) °C
Flame Rating:UL94 V-0 (0.8mm)

PA6 Wear-Resistant

Density:1.13 - 1.15 g/cm³
Tensile Strength:65 - 75 MPa
HDT:65 - 75 (1.82MPa) °C

PA66 Toughened

Density:1.08 - 1.12 g/cm³
Tensile Strength:55 - 65 MPa
HDT:70 - 80 (1.82MPa) °C

PA66 Wear-Resistant

Density:1.14 - 1.16 g/cm³
Tensile Strength:75 - 85 MPa
HDT:70 - 80 (1.82MPa) °C

PA66 Hydrolysis-Resistant

Density:1.13 - 1.15 g/cm³
Tensile Strength:75 - 85 MPa
HDT:75 - 85 (1.82MPa) °C

Long-Chain Nylon (PA12)

Density:1.02 - 1.06 g/cm³
Tensile Strength:50 - 60 MPa
HDT:50 - 60 (1.82MPa) °C

PPA+35%GF High-Temperature Nylon

Density:1.45 - 1.50 g/cm³
Tensile Strength:200 - 220 MPa
HDT:280 - 290 (1.82MPa) °C

MXD6 High Barrier Nylon

Density:1.21 - 1.22 g/cm³
Tensile Strength:90 - 100 MPa
HDT:95 - 105 (1.82MPa) °C

PC & PC Compounds

8 products

Automotive Lighting Grade PC

-

10% Glass-Filled Polycarbonate (PC 9160H)

-

Heat-Resistant Polycarbonate (PC 9070H)

-

Infrared-Transmitting Polycarbonate (PC 9227H)

-

Flame Retardant PC

Density:1.19 - 1.23 g/cm³
Tensile Strength:55 - 65 MPa
HDT:120 - 130 (1.82MPa) °C
Flame Rating:UL94 V-0 (1.5mm) / V-2 (0.8mm)

Silicone PC

Density:1.18 - 1.20 g/cm³
Tensile Strength:55 - 65 MPa
HDT:120 - 130 (1.82MPa) °C

Polypropylene (PP)

3 products

Transparent PP

Density:0.90 - 0.91 g/cm³
Tensile Strength:30 - 35 MPa
HDT:95 - 105 (0.45MPa) °C

PP Flame Retardant Masterbatch

Density:1.10 - 1.20 g/cm³
Flame Rating:UL94 V-0 (1.6mm, at 30-35% dosage in PP)

PPS Polyphenylene Sulfide

3 products

PPS GF40 (40% Glass-Filled PPS)

-

Conductive PPS (10% Carbon Fiber)

-

Wire & Cable Compounds

4 products

PVC Wire & Cable Compounds

-

Silane Crosslinkable XLPE Compounds

-

LSZH Cable Compounds

-

TPU Cable Jacketing Compounds

-