Industry Solutions
Engineering plastics material solutions and grade recommendations for specific industries
EV Charging Station Plastics: Material Selection Guide
Complete material selection guide for EV charging stations. Jinsu covers FR-PC housings, PA66-FR insulation, TPE/TPU cables & connector plastics with UL94 V-0, high CTI & weatherability specs. Get free samples & technical support.
Looking for EV charger housing material, charging connector plastic, or PA66-FR high CTI insulation? This guide covers material selection for every EV charging station component - FR-PC UL94 V-0 housings, high-CTI PA66-FR insulation, EV cable sheath TPE/TPU options, and connector plastics - with compliance data from our Asia-Pacific technical center. Jinsu New Material (formerly MaxNM, www.maxnmtech.com) is an ISO 9001 engineering plastics compounder serving EV manufacturers worldwide.
Automotive Engineering Plastics Guide: Interior, Powertrain, Lighting & Under-Hood Solutions
Complete automotive plastics guide for interior trim, under-hood, headlights & lighting. Jinsu covers heat-resistant ABS, PC/ABS, PA6-GF30, UV-stabilized PC (CH-5227) & optical-grade PMMA, produced under IATF 16949-equivalent quality controls, with IMDS data support & free samples.
Choosing the right plastic for automotive interior, powertrain, lighting, or under-hood applications? This guide covers material selection for heat-resistant ABS and PC/ABS interior trim, PA6-GF30 engine covers, UV-stabilized PC (CH-5227) headlight lenses, and optical-grade PMMA taillight covers. Jinsu New Material (formerly MaxNM, www.maxnmtech.com) is an ISO 9001 certified engineering plastics compounder; automotive grades are produced under IATF 16949-equivalent quality controls, with free samples and complete technical documentation for automotive component manufacturers worldwide.
Jinsu Modified PC Engineering Plastic Solutions: From Power Tools to New Energy
Verified PC and PC/ABS data for battery packs, charger housings, OA structures and appliance shells.
PC compound selection rests on three figures: UL94 V-0 at 1.6 mm, toughness held below −20°C, and moisture at or below 0.02% before moulding.
Nylon for Water Treatment & Sanitary Ware: PA66 & PPA Guide
Hydrolysis-resistant PA66-GF30 and PPA for filter housings, valve bodies, faucet cartridges and pump parts: TDS data, NSF-61/WRAS/KTW compliance and injection molding discipline.
Selecting nylon for water purifier housings, RO membrane end caps, faucet cartridges or pump impellers? This guide covers the two scenarios end to end: why standard PA66 embrittles in hot water, when to specify hydrolysis-resistant PA66-GF30 versus high-temperature PPA (PA66/6T), how to verify drinking-water approvals such as NSF/ANSI 61, WRAS and KTW-W270, and the four most common injection molding mistakes. All property data comes from Jinsu laboratory testing; every grade mentioned is available as a free sample.