Back to Category
PA6 Wear-Resistant
PA / Nylon
Technical Specifications
- •Excellent Wear Resistance
- •Low Friction Coefficient
- •Long Service Life
Applications
Bearing CagesGearsSliding BlocksGuide RailsTextile Machinery
Technical Data Sheet (TDS)
| Property | Typical Value |
|---|---|
| Density | 1.13 - 1.15 g/cm³ |
| Melt Flow Rate (MFR) | 10 - 25 (230°C/2.16kg) g/10min |
| Tensile Strength | 65 - 75 MPa |
| Elongation at Break | 20 - 40 % |
| Flexural Modulus | 2400 - 2700 MPa |
| Izod Impact Strength | 6 - 10 kJ/m² |
| Heat Deflection Temperature (HDT) | 65 - 75 (1.82MPa) °C |
| Appearance | Natural / Black Pellets |
The above data are typical values and do not constitute a specification guarantee. Please contact us for the latest product datasheet.
Processing Conditions
Drying Temperature
80 - 90°C
Drying Time
4 - 6 hours
Injection Temperature
230 - 260°C
Mold Temperature
60 - 90°C
Injection Pressure
70 - 120 MPa
Holding Pressure
40 - 80 MPa
Back Pressure
2 - 5 MPa
Screw Speed
50 - 100 rpm
Important Notes
- Moisture content must be below 0.1% before processing
Storage & Handling
PA6 is highly hygroscopic. Store sealed in a dry environment. Use within 24 hours after opening or re-dry.