PA6+30% Glass Fiber Nylon
PA / Nylon
PA6 GF30 pellets, grade B7G6XH: tensile strength 150 MPa and flexural modulus 8000 MPa. View the grade TDS; request samples and a quote.
Free samples: 5–10 kg. Trial orders: minimum 25 kg. Regular production: minimum 1,000 kg. The customer pays shipping costs.
Jinsu has not completed UL Yellow Card certification. TDS data and UL94 test results do not constitute UL recognition. If your project requires a Yellow Card, verify certification for the exact grade before approval or purchase.
Technical Specifications
- •B7G6XH · PA6 GF30
- •150 MPa · ISO 527
- •8000 MPa · ISO 178
Applications
Technical Data Sheet (TDS) · B7G6XH
| Property | Test Method | Test Condition | Typical Value |
|---|---|---|---|
| Density | ISO 1183 | 23°C | 1.34 g/cm³ |
| Tensile Strength | ISO 527 | 5 mm/min | 150 MPa |
| Elongation at Break | ISO 527 | 5 mm/min | 4% |
| Flexural Modulus | ISO 178 | 2 mm/min | 8000 MPa |
| Charpy notched impact strength | ISO 179 | 23°C | 23 kJ/m² |
| Heat Deflection Temperature (HDT) | ISO 75 | 1.82 MPa; unannealed | 195°C |
| Flame Rating | UL 94 | 1.6 / 2.0 / 3.2 mm | HB |
Typical values and performance ranges are provided for grade selection. Custom formulations can be adjusted to application requirements. Final properties follow the selected grade TDS and are not specification guarantees.
- This table applies only to B7G6XH. Refer to the separate TDS for any other grade.
- Typical values from the named grade sheets are selection references, not universal material properties or purchase guarantees. Confirm color, specimen and test conditions for the offered grade.
Processing Conditions · B7G6XH
100–120°C
4–6 h
80–100°C
Storage & Handling
Reinforced nylon readily absorbs moisture — must be stored sealed. Moisture level must be ≤ 0.1% after drying. Desiccant dryer recommended.
Related Products
Suzhou Jinsu New Material Co., Ltd.
WhatsApp: +86 17351132569
sales@maxnmtech.com
Verified Customer Feedback
“The PA6+30GF grade has very good dimensional stability, and the surface shows no glass-fibre float — the parts look excellent.”
R&D Manager · Keyang
power tool components manufacturer
Source: email correspondence, 2026-07-02
“We use both PA6+50GF and PA6+30GF for HVAC vent flaps, and both meet our acceptance criteria for dimensional accuracy and batch consistency.”
Quality Manager · automotive parts manufacturer
automotive parts manufacturer
Company name withheld at the customer's confidentiality request.
Source: direct communication, 2026-08-27
Feedback entries: 2
Product Overview
The displayed TDS covers only PA6 GF30 grade B7G6XH: tensile strength 150 MPa (ISO 527, 5 mm/min), flexural modulus 8000 MPa (ISO 178, 2 mm/min) and notched Charpy 23 kJ/m² (ISO 179, 23°C). HDT is 195°C at 1.82 MPa, unannealed.
These are typical test values for this grade, not the properties of every PA6 GF30 material. GF40, GF45 and other formulations have separate sheets; their values must not be combined into this grade specification.
Frequently Asked Questions
Which grade does the displayed table cover?
The displayed TDS covers only PA6 GF30 grade B7G6XH: tensile strength 150 MPa (ISO 527, 5 mm/min), flexural modulus 8000 MPa (ISO 178, 2 mm/min) and notched Charpy 23 kJ/m² (ISO 179, 23°C). HDT is 195°C at 1.82 MPa, unannealed. These are typical test values for this grade, not the properties of every PA6 GF30 material. GF40, GF45 and other formulations have separate sheets; their values must not be combined into this grade specification.
What information is needed for quotation and trials?
Send the selected grade, color, wall thickness, service load and temperature, processing method, required tests, volume and destination. Validate dimensions, appearance and performance on molded parts. Use separate documents for other grades instead of combining their properties into one material specification.