PA6 General Purpose
PA / Nylon
Source PA6 nylon 6 pellets for injection molded parts. Review properties and processing conditions, then request TDS, samples and a quote.
Free samples: 5–10 kg. Trial orders: minimum 25 kg. Regular production: minimum 1,000 kg. The customer pays shipping costs.
Jinsu has not completed UL Yellow Card certification. TDS data and UL94 test results do not constitute UL recognition. If your project requires a Yellow Card, verify certification for the exact grade before approval or purchase.
Technical Specifications
- •Good Mechanical Properties
- •Excellent Wear Resistance
- •Easy Processability
Applications
Technical Data Sheet (TDS)
| Property | Test Method (ISO) | Typical Value |
|---|---|---|
| Density | ISO 1183 | 1.12 - 1.14 g/cm³ |
| Melt Flow Rate (MFR) | ISO 1133 | 30 - 60 (230°C/2.16kg) g/10min |
| Tensile Strength | ISO 527 | 70 - 80 MPa |
| Elongation at Break | ISO 527 | 30 - 60 % |
| Flexural Modulus | ISO 178 | 2500 - 2800 MPa |
| Izod Impact Strength | ISO 180 | 5 - 8 kJ/m² |
| Heat Deflection Temperature (HDT) | ISO 75 | 65 - 75 (1.82MPa) °C |
| Appearance | Visual | Natural / White Pellets |
The above data are typical values and do not constitute a specification guarantee. Please contact us for the latest product datasheet.
Processing Conditions
80 - 90°C
4 - 8 hours
230 - 260°C
60 - 90°C
70 - 120 MPa
40 - 80 MPa
2 - 5 MPa
50 - 100 rpm
- Moisture content must be below 0.1% before processing
- Use desiccant dryer for best results
Storage & Handling
PA6 is highly hygroscopic — must be stored in sealed containers. Use aluminum foil bags or sealed drums in a dry environment. Use within 24 hours after opening or re-dry before use.
Related Products
Suzhou Jinsu New Material Co., Ltd.
WhatsApp: +86 17351132569
sales@maxnmtech.com
Product Overview
PA6 General Purpose is the workhorse of the nylon family: a cost-effective, tough and easily processed polyamide 6 that delivers a balanced profile of mechanical strength, wear resistance and chemical resistance for thousands of industrial applications. With a tensile strength of 70–80 MPa, flexural modulus of 2500–2800 MPa and Izod impact of 5–8 kJ/m², it performs reliably in gears, bearing cages, casters, cable ties and general injection-molded parts.
Jinsu's general-purpose PA6 is produced from high-quality virgin resin on twin-screw compounding lines, giving consistent melt flow (30–60 g/10min at 230°C/2.16kg), stable molecular weight and clean, uniform pellets in natural or white color. It processes easily on standard injection molding machines between 230–260°C, fills thin-wall and complex molds reliably, and is compatible with common additives such as lubricants, nucleating agents and color masterbatches. Where higher stiffness is needed, we also offer PA6 GF10-50 and impact-modified grades. High-viscosity PA6 can also be used for multilayer film co-extrusion.
As an ISO 9001-certified Chinese supplier, Jinsu provides factory-direct pricing, free samples, low MOQ and worldwide shipping. Request a quote and technical datasheet for PA6 general purpose pellets today.
Applications in Detail
Bearings & Bearing Cages
PA6's low coefficient of friction and good wear resistance make it a proven material for bearing cages, bushings and slide bearings. The grade's dimensional stability and toughness allow pressed-in metal inserts to stay secure, while its self-lubricating behavior reduces noise and extends service life in motors and gearboxes.
Gears & Mechanical Parts
For gears, pulleys, rollers and levers, general-purpose PA6 combines adequate stiffness, excellent fatigue resistance and quiet operation. It absorbs vibration and shock better than metal or glass-filled grades, and can be reinforced or lubricated further for high-load or high-speed transmissions.
Cable Ties & General Injection Parts
Cable ties, clips, fasteners, casters and housings benefit from PA6's toughness, snap-fit strength and chemical resistance. Its easy flow fills thin sections cleanly, enabling fast cycle times and high output on multi-cavity molds at competitive part cost.
Frequently Asked Questions
What is the difference between PA6 and PA66?
PA6 absorbs slightly more moisture, has a lower melting point and is easier to process with a wider processing window. PA66 offers higher heat resistance and stiffness but costs more. For most general-purpose parts, PA6 provides the best cost-performance balance.
Does PA6 absorb moisture and how should it be dried?
Yes, PA6 is highly hygroscopic. Dry at 80–90°C for 4–8 hours with a desiccant dryer, keeping moisture below 0.1% before molding. Store in sealed containers and use within 24 hours of opening, or re-dry before use.
Can PA6 be supplied in custom colors?
Yes. Natural and white pellets are standard, and we can color-match custom shades using high-quality masterbatches. For high volumes we can also compound directly to your color specification.
What is the minimum order quantity?
Free samples: 5–10 kg. Trial orders: minimum 25 kg. Regular production: minimum 1,000 kg. The customer pays shipping costs.