Halogen-Free FR PC/ABS
PC & PC Compounds
Source flame retardant PC/ABS compound pellets for molded housings. Compare processing and material data; request TDS, samples and pricing.
Free samples: 5–10 kg. Trial orders: minimum 25 kg. Regular production: minimum 1,000 kg. The customer pays shipping costs.
Jinsu has not completed UL Yellow Card certification. TDS data and UL94 test results do not constitute UL recognition. If your project requires a Yellow Card, verify certification for the exact grade before approval or purchase.
Technical Specifications
- •UL94 V-0 Halogen-Free
- •Charpy Notched Impact 40 kJ/m² · ISO 179
- •Easy Flow Processing
Applications
Technical Data Sheet (TDS) · PC/ABS SF75 HF
| Property | TestMethod | Test Condition | Typical Value |
|---|---|---|---|
| Density | ISO 1183 | 23°C | 1.2 g/cm³ |
| Melt Flow Rate | ISO 1133 | 260°C, 2.16 kg | 12 g/10min |
| Molding Shrinkage | ISO 2577 | 23°C | 0.5 - 0.7 % |
| Tensile Strength | ISO 527 | 50 mm/min | 58 MPa |
| Elongation at Break | ISO 527 | 50 mm/min | 40 % |
| Flexural Strength | ISO 178 | 2 mm/min | 85 MPa |
| Flexural Modulus | ISO 178 | 2 mm/min | 2200 MPa |
| Charpy Notched Impact, 23°C | ISO 179 | 23°C | 40 kJ/m² |
| Charpy Notched Impact, -40°C | ISO 179 | -40°C | 25 kJ/m² |
| Heat Deflection Temperature (1.82 MPa) | ISO 75 | 1.82 MPa, unannealed | 88 °C |
| Heat Deflection Temperature (0.45 MPa) | ISO 75 | 0.45 MPa, unannealed | - |
| UL94 Rating, 1.6 mm | UL 94 | 1.6 mm | V-0 |
| UL94 Rating, 2.0 mm | UL 94 | 2.0 mm | V-0 |
| UL94 Rating, 3.2 mm | UL 94 | 3.2 mm | V-0 |
| Surface Resistance | IEC 60093 | 1000 V | 1.00E+15 Ω |
| Comparative Tracking Index | IEC 60112 | Solution A | - |
| Glow-Wire Flammability Index, 1.5 mm | IEC 60695-2-12 | 1.5 mm | 850 °C |
Typical values and performance ranges are provided for grade selection. Custom formulations can be adjusted to application requirements. Final properties follow the selected grade TDS and are not specification guarantees.
- Coloured grades may differ from the values above.
- Typical values are laboratory averages for reference only and are not a product specification.
Processing Conditions · PC/ABS SF75 HF
80 - 90 °C
3 - 4 h
260 - 270 °C
30 - 50 °C
- Barrel rear 240-245°C, middle 260-265°C, front 265-270°C, nozzle 265-270°C.
- Upper processing temperature limit 270°C; medium back pressure; moderate to fast injection speed.
- Processing conditions are for reference; adjust to the machine, mould and part.
Storage & Handling
FR PC/ABS is moisture sensitive. Store sealed in dry environment. Must dry before use. Avoid high-temperature storage.
Related Products
Suzhou Jinsu New Material Co., Ltd.
WhatsApp: +86 17351132569
sales@maxnmtech.com
Product Overview
Halogen-Free FR PC/ABS (grade SF75 HF) is a flame-retardant polycarbonate/ABS alloy rated UL94 V-0 at 1.6 mm, formulated without halogens to meet RoHS and modern environmental requirements. It delivers an excellent balance of impact strength (40 kJ/m²), heat resistance (HDT 88°C) and processing flow, with tensile strength of 58 MPa.
PC/ABS alloys are valued where standard PC is too stiff or too expensive and ABS alone lacks heat or flame performance. Our SF75 HF grade is ideal for EV charger housings, electronics enclosures, office equipment, appliance panels and automotive interiors, where designers need flame safety without sacrificing impact or surface quality.
Produced under ISO 9001 with halogen-free FR technology, Jinsu's FR PC/ABS is available factory-direct with free samples, low MOQ and worldwide shipping. Ask for SF75 HF pricing and datasheets.
Applications in Detail
EV Charger & Power Equipment Housings
Charging equipment and power housings must meet strict flame and electrical safety standards. SF75 HF provides UL94 V-0 at 1.6 mm with halogen-free compliance, good flow for complex housings, and impact strength that protects parts during transport and daily use.
Office Equipment & Appliance Panels
Printers, monitors, power tools and appliance panels benefit from PC/ABS's balanced stiffness and impact, plus excellent painted and textured surface finish. The halogen-free FR system also satisfies green procurement requirements in Europe and North America.
Lithium Battery Housings
Battery housings for power tools, e-bikes and energy storage systems need flame resistance, impact protection and dimensional stability. SF75 HF delivers UL94 V-0 at 1.6 mm with halogen-free compliance, protecting battery cells and meeting electrical safety requirements in compact, thin-wall designs.
Frequently Asked Questions
What does halogen-free mean and why does it matter?
Halogen-free flame retardants contain no bromine or chlorine, so under fire they produce less smoke and fewer corrosive gases than traditional FR systems. This matters for electronics, public equipment and compliance with RoHS and green-procurement standards.
How is FR PC/ABS different from FR PC?
PC/ABS offers better impact at low temperature, easier processing (260–270°C vs 260–300°C) and lower cost than FR PC, with slightly lower heat resistance (HDT 88°C vs 120–130°C). Choose PC/ABS for housings below ~80°C; choose PC for hotter or optically transparent parts.
What colors are available for SF75 HF?
SF75 HF is available in black and natural, with custom color matching available for production volumes. Contact us for color approval samples.
How should FR PC/ABS be dried and molded?
Dry at 80–90°C for 3–4 hours with a desiccant dryer; the material must be fully dry before molding. Recommended melt temperature is 260–270°C with mold temperature 30–50°C.