PA6 Toughened
PA / Nylon
Toughened PA6 B2XLZ0 pellets with 100 kJ/m² notched impact and 350% elongation, built for multilayer coextrusion and blow-molded food and pharmaceutical containers. Request TDS, samples and pricing.
Free samples: 5–10 kg. Trial orders: minimum 25 kg. Regular production: minimum 1,000 kg. The customer pays shipping costs.
Jinsu has not completed UL Yellow Card certification. TDS data and UL94 test results do not constitute UL recognition. If your project requires a Yellow Card, verify certification for the exact grade before approval or purchase.
Technical Specifications
- •B2XLZ0 · Toughened PA6
- •100 kJ/m² Notched Impact · ISO 179
- •350% Elongation · Multilayer Coextrusion Blow Molding
Applications
Technical Data Sheet (TDS) · PA6 B2XLZ0
| Property | Test Method | Test Condition | Typical Value |
|---|---|---|---|
| Density | ISO 1183 | 23°C | 1.08 g/cm3 |
| Tensile Strength | ISO 527 | 50 mm/min | 30 MPa |
| Elongation at Break | ISO 527 | 50 mm/min | 350% |
| Flexural Strength | ISO 178 | 2 mm/min | 25 MPa |
| Flexural Modulus | ISO 178 | 2 mm/min | 600 MPa |
| Charpy notched impact strength | ISO 179 | 23°C | 100 kJ/m2 |
| Heat Deflection Temperature (HDT) · 0.45 MPa | ISO 75 | unannealed | 105°C |
| Flame Rating | UL 94 | 1.6 / 2.0 / 3.2 mm | HB |
Typical values and performance ranges are provided for grade selection. Custom formulations can be adjusted to application requirements. Final properties follow the selected grade TDS and are not specification guarantees.
- This table applies only to B2XLZ0. Refer to the separate TDS for any other grade.
- Typical values from the named grade sheets are selection references, not universal material properties or purchase guarantees. Confirm color, specimen and test conditions for the offered grade.
Processing Conditions · B2XLZ0
80–90°C
2–4 h
220–230°C
80–100°C
Storage & Handling
PA6 is highly hygroscopic. Store sealed in a dry environment. Use within 24 hours after opening or re-dry.
Related Products
Suzhou Jinsu New Material Co., Ltd.
WhatsApp: +86 17351132569
sales@maxnmtech.com
Applications in Detail
Multilayer Coextrusion Packaging
B2XLZ0 is typically run in a five-layer structure such as PE structural layer / tie layer / toughened PA6 / tie layer / PE sealing layer. The toughened layer delivers barrier and impact resistance, the PE layers handle heat sealing and cost, and the tie layers bond nylon to polyolefin. Hold melt temperature at 220–230°C and keep inter-layer temperature differences under 30°C, or the parison develops interface instability and delamination.
Blow-Molded Food & Pharmaceutical Containers
Melt strength decides the blow-molding window: B2XLZ0 runs at about 2 g/10min MFI (235°C/2.16kg), so sag is low and large-diameter, high-neck-ratio bottles and jerry cans are practical. Mold temperature of 80–100°C improves surface gloss and dimensional stability; vent the mold properly or the inner wall develops pitting. For food contact, specify food-grade colorants and additives and supply compliance statements under the target market's rules, such as EU 10/2011 or FDA 21 CFR.
Extruded Film, Sheet & Hot Fill
Beyond hollow blow molding, B2XLZ0 also suits cast film, thermoforming sheet and hot-fill packaging. HDT is 105°C at 0.45 MPa, so 85–95°C hot fill and pasteurisation cycles are tolerable; on the cold side the 350% elongation keeps containers from cracking in frozen storage and cold-chain transport. Dry to below 0.1% moisture before extrusion or the film shows bubbles and silver streaks.
Frequently Asked Questions
Can toughened PA6 be used for food contact?
Yes, with a food-grade formulation. B2XLZ0 natural base resin carries no restricted additives, but confirm the colorant, antioxidant and release agent are food-grade for the actual shipment, and supply compliance statements for the target market (EU 10/2011, FDA 21 CFR, and so on). Pharmaceutical packaging also needs extractables and leachables assessment.
What matters in multilayer coextrusion blow molding?
Three things matter most: interlayer adhesion, which needs a matched tie-layer resin or the container delaminates on impact; closely matched melt temperatures across layers, held within 30°C to avoid interface disturbance; and drying, with PA6 moisture below 0.1% or bubbles and silver streaks appear. Use an adjustable die to fine-tune parison wall distribution.
How does B2XLZ0 differ from standard PA6?
Standard PA6 is stronger and stiffer but elongates only tens of percent and cracks easily under low-temperature or high-rate impact. B2XLZ0 trades some stiffness and strength (600 MPa modulus, 30 MPa tensile) for 100 kJ/m² notched impact and 350% elongation, which suits packaging and containers that must absorb impact energy.