Back to Category
PA66 Toughened
PA / Nylon
Technical Specifications
- •Super Tough > 40 kJ/m²
- •Excellent Low-Temp Impact
- •High Heat Resistance
Applications
Automotive Engine BayRefrigeration PartsPower ToolsSafety ComponentsPipe Fittings
Technical Data Sheet (TDS)
| Property | Typical Value |
|---|---|
| Density | 1.08 - 1.12 g/cm³ |
| Melt Flow Rate (MFR) | 5 - 15 (275°C/5kg) g/10min |
| Tensile Strength | 55 - 65 MPa |
| Elongation at Break | 50 - 80 % |
| Flexural Modulus | 2000 - 2400 MPa |
| Izod Impact Strength | 40 - 70 kJ/m² |
| Heat Deflection Temperature (HDT) | 70 - 80 (1.82MPa) °C |
| Appearance | Natural / Black Pellets |
The above data are typical values and do not constitute a specification guarantee. Please contact us for the latest product datasheet.
Processing Conditions
Drying Temperature
80 - 100°C
Drying Time
4 - 8 hours
Injection Temperature
260 - 290°C
Mold Temperature
70 - 100°C
Injection Pressure
70 - 120 MPa
Holding Pressure
40 - 80 MPa
Back Pressure
2 - 5 MPa
Screw Speed
50 - 100 rpm
Important Notes
- Moisture must be ≤ 0.1% before molding
Storage & Handling
PA66 is highly hygroscopic. Store sealed in a dry environment. Use within 24 hours after opening or re-dry.